Sharp UX-108 Operation Manual page 39

Storing fax and telephone numbers for Automatic Dialing
1
Press these keys:
The display will show:
2
Press 1 to select SET.
The display will show:
3
Enter a two-digit Speed Dial number by pressing the number keys (01 to
10 for Rapid Key Dialing, 11 to 30 for Speed Dialing).
4
Enter the fax or voice number by pressing the number keys (max. of 32
digits including pauses). (Note: Spaces and hyphens cannot be entered.)
• • • • If you make a mistake, press the HOLD/SEARCH key to move the
cursor back to the mistake and then enter the correct number. The new
number will replace the old number.
• • • • If a pause is required between any of the digits to access a special service
or an outside line, press the REDIAL key (two seconds per pause).
Several pauses can be entered in a row.
5
Press the START key.
FUNCTION
FAX/TEL. # MODE
1
FAX/TEL. # SET
ENTER SPEED #
0 1
5 5
5 1
START
Sending a Fax by Automatic Dialing
3
(Example)
3 4
2
(Example)
31