Rapid Key Dialing - Sharp UX-108 Operation Manual

Sending a Fax by Automatic Dialing

Rapid Key Dialing

If the number you want to dial has been stored for Automatic Dialing as a
Speed Dial number from 01 to 10, you can dial it by pressing the
corresponding Rapid Key.
1
Load the document(s).
The display will show:
READY TO SEND
• • • • Set the resolution and/or contrast if
desired.
2
Press the Rapid Key corresponding to the
desired Speed Dial number.
• • • • The name of the receiving party will
appear in the display. If no name was
stored, the fax number will appear. (If
the name or number is incorrect, press
the STOP key.)
• • • • The document will be automatically
transmitted once the connection is
made.
34
RESOLUTION
01 02
03 04
06
Example:
To dial Speed
Dial number 03, press Rapid
Key 03.