Copier Trouble - Sharp SF-1116 Operation Manual

Problem
Dust, dirt, smudges
appear on copies.
Power is on but copying
is not possible.
Document glass or document
cover dirty?
Original smudged or blotchy?
Is the indicator on?
Is the indicator on?
Is the indicator blinking?
Is the POWER SAVE (
indicator blinking?
Is only the POWER SAVE
( ) indicator on?
Is steadily lit in the copy
quantity display?
Is the indicator on?
Has a blinking appeared
in the copy quantity display?

COPIER TROUBLE?

Solution
Clean regularly. See page 39.
Use a clean original.
Developer is required. Contact your Sharp
Service Centre as soon as possible.
See page 25.
Maintenance is required. Contact your
Sharp Service Centre as soon as possible.
See page 25.
Wait until warm-up is complete.
)
Warm-up time is approximately 35
seconds.
The copier is in the auto power shut-off
mode. Press the print (
page 37, POWER SAVE MODES.
The copier is in the auditing mode.
Enter your account number using the 10-
key pad. See page 8.
Copy paper is needed. See page 3,
LOADING COPY PAPER.
1. Paper has run out in an optional multi
bypass feeder. Add paper to continue.
2. Paper has failed to feed from an
optional multi bypass feeder.
See page 64.
) button. See
41