User Programs - Sharp SF-1116 Operation Manual

USER PROGRAMS

The user programs allow the parameters of certain functions to be set,
changed, or cancelled as desired.
NOTE:
If operation of the user programs by general users (other than the
copier manager) causes problems, detach pages 31 to 36 and store
them in a safe place.
Program No. Program name
1 Auto clear time
2 Preheat mode
3 Auto power shut-off
timer
4 Auto power save
control
5 Stream feeding
mode*
7 Sorter bin access
mode*
10 Auditing mode
11 Account number
entry
12 Account number
change
13 Account number
deletion
14 Number of copies
per account
15 Resetting account
20 Auto power shut-off
setting
* These programs do not affect the copier functions unless certain optional equipment is installed.
30
List of user programs
This copier has the following user programs.
Description
Sets the auto clear time. The copier returns to the initial settings
when the auto clear time elapses after the last copy is made.
Sets the time that elapses before the copier enters the preheat
mode after any operation is made. See page 37.
Sets the time that elapses before the copier enters the auto power
shut-off mode after any operation is made. See page 37.
Enables or disables the automatic power save control function.
See page 37.
Enables or disables the stream feeding mode when an optional
automatic document feeder is installed. See page 50.
Enables or disables the sorter bin access mode when an optional
sorter or staple sorter is installed. See page 52.
Enables or disables the auditing mode, which controls access to
copier. See page 8.
Registers accounts for auditing mode.
Changes account numbers for auditing mode.
Deletes accounts for auditing mode.
Displays the total number of copies made against account numbers.
Resets all audit accounts or resets any desired individual accounts.
Enables or disables the auto power shut-off mode. See page 37.