Sharp SF-1116 Operation Manual page 6

LOADING COPY PAPER
Left guide
Maximum height line
Paper size plate
4
Changing the copy paper size in the tray
Gently lift and pull out the paper tray until it stops.
1
Squeeze the lock lever of the front guide and slide the
2
Lever
front guide to match the width of the paper.
Move the left guide to the appropriate slot as marked on
3
the tray.
Front guide
Load copy paper into the tray.
4
Place the paper size plate in the front of the paper tray.
5
6 Push the paper tray firmly back into the copier.
With inch system machines, when using 11" x 17" copy paper,
store the left guide in the slot to the left of the front guide.
The paper size indication which shows through the slot on the
front of the copier should match the selected paper size.