Sharp SF-1116 Operation Manual page 37

Program No. 14: Number of copies per account
Program No. 14 is used to display the total number of copies made
against each account number. When program No. 14 is entered, an
account number will appear in the copy quantity display.
If no account number has been registered, "14E" will appear in the
copy quantity display. Press the
2 on page 31.
ZOOM
%
ZOOM
%
1 2
4 5
8
7
0/
C
key. You will return to step
1. Use the copy ratio display (
account number.
Use the
3
2. Press and hold the 0 key.
The number of copies made against the specified account
6
number will be displayed. The two higher digits ("–" is displayed
before the two digits.) and the three lower digits will appear
alternately while the 0 key is pressed.
9
Example: 1,234 copies
The upper limit for the number of copies is 49,999. If the number
of copies made reaches 50,000, the number will be reset to 0
and counting will start again from 0.
3. Repeat steps 1 and 2 for other account numbers.
4. To continue with other user programs, press the
key and select other program numbers. To exit the user
program mode, press the TRAY SELECT (
USER PROGRAMS
) key to select the
key to advance through the account numbers.
) key.
35