Sharp SF-1116 Operation Manual page 36

USER PROGRAMS
Program No. 12: Account number change
Program No. 12 is used to change account numbers. When program
No. 12 is entered, an account number will appear in the copy quantity
display.
If no account number has been registered, "12E" will appear in the
copy quantity display. Press the
2 on page 31.
ZOOM
%
2 3
1
4 5
6
8 9
7
0/ C
Program No. 13: Account number deletion
Program No. 13 is used to delete accounts. When program No. 13 is
entered, "0" will blink on the right side of the copy quantity display.
If no account number has been registered, "13E" will appear in the
copy quantity display. Press the
2 on page 31.
1 2 3
4 5 6
8 9
7
0/ C
ZOOM
%
34
key. You will return to step
1. Use the copy ratio display (
account number to be changed.
Use the key to advance through the account numbers.
2. Press the print (
"–––" will blink in the copy quantity display.
3. Enter a new account number using the 10-key pad.
4. Press the print (
If a number that is already registered or "000" is entered, the
number will blink in the copy quantity display.
5. Repeat steps 1 to 4 for other account numbers.
6. To continue with other user programs, press the
key and enter other program numbers. To exit the user
program mode, press the TRAY SELECT (
key. You will return to step
1. To delete an individual account, press key 0 on the 10-
key pad.
To delete all accounts, press key 1.
2. Press the print (
If you have pressed key 0 in step 1, an account number will
appear in the copy quantity display. Proceed to step 3.
If you have pressed key 1, all account numbers will be deleted.
Proceed to step 5.
3. Use the copy ratio display (
account number to be deleted.
Use the key to advance through the account numbers.
4. Press the print (
The specified account will be deleted.
5. To continue with other user programs, enter other
program numbers. To exit the user program mode,
press the TRAY SELECT (
) key to select the
) button.
) button.
) button.
) key to select the
) button.
) key.
) key.