A: Misfeed In The Paper Feed Area - Sharp AL-2021 Operation Manual

A: Misfeed in the paper feed area

1
Gently remove the misfed paper from the paper feed area as
shown in the illustration. When the misfeed (
blinks, and the misfed paper is not seen from the paper feed
area, pull out the paper tray and remove the misfed paper. If the
paper cannot be removed, proceed to "B: Misfeed in the fusing
area".
The fusing unit is hot. Do not touch the fusing unit when
removing misfed paper. Doing so may cause a burn or other
injury.
• Do not touch the surface (green portion) of the drum cartridge
• If the paper has been fed through the multi-bypass tray, do
2
Close the side cover by pressing the round projections near
the side cover open button. The misfeed (
out and the start (
when removing the misfed paper. Doing so may damage the
drum and cause smudges on copies.
not remove the misfed paper through the multi-bypass tray.
Toner on the paper may stain the paper transport area,
resulting in smudges on copies.
) indicator will light up.
84
) indicator
) indicator will go
9