G Misfeed In The Stand/1 X 500 Sheet Paper Drawer; G Misfeed In The Stand/3 X 500 Sheet Paper Drawer; Misfeed In The Paper Feed Area - Sharp AR-BC260 Operation Manual

Hide thumbs Also See for AR-BC260:
Table of Contents

Advertisement

Misfeed in the paper feed area

NOTE
Paper misfed from a paper tray may be extending out of the tray into the right side cover area. In this case if the
tray is drawn out of the machine, the paper may become torn and difficult to remove. To prevent this from
happening, always open the right side cover first and remove the misfed paper if it is extending into that area.
Misfeed in the 500 sheet paper drawer
Open the upper side cover.
1
NOTE
If paper is loaded in the bypass tray, temporarily
remove the paper and close the bypass tray before
opening the side cover.
2
Remove the misfed paper.
NOTE
The misfeed may have occurred inside the machine.
Check carefully and remove it.
3
If misfed paper is not found in step 2, pull out
paper tray 1 and remove the misfed paper.
4
Gently close the paper tray.
Push the lever upward
and gently open the
cover.
Be careful not to tear the
misfed
paper
during
removal.
Be careful not to tear the
misfed
paper
during
removal.
Push the tray firmly all
the
way
into
the
machine.
Gently close the upper side cover.
5
Misfeed in the bypass tray
Remove the misfed paper from the bypass
1
tray.
2
After removing the misfed paper, open
and close the duplex bypass/inverter unit
to reset.
MISFEED REMOVAL
After closing, confirm
that
the
misfeed
message
has
been
cleared and the normal
display appears.
Be careful not to tear the
misfed
paper
during
removal.
Grasp the finger hold
and gently open the unit.
After closing, confirm that
the
misfeed
message
has been cleared and the
normal display appears.
If the duplex bypass/
inverter
unit
is
not
installed, close the side
cover in the same way.
2-19
2

Advertisement

Table of Contents
loading

Table of Contents