Sharp AL-2021 Operation Manual page 32

Making two-sided copies
1
Place the original(s) on the document glass or in the SPF. (see
"ORIGINAL PLACEMENT" (p.26).
2
Select two-sided copy mode.
When copying in a one-sided to two-sided mode:
Use the Two-sided copy key to select the desired one-sided to two-sided
copying mode (Turn on Long Edge or Turn on Short Edge). See the
illustrations on page 31.
3
Select the copy settings. See "SET THE COPY QUANTITY"
(p.28), "EXPOSURE ADJUSTMENT/PHOTO COPYING" (p.28),
and "REDUCTION/ENLARGEMENT/ZOOM" (p.30).
Using the document glass
1 Press the start (
The original is scanned into the unit's memory and the number of the
copy quantity blinks in the display.
Place the original that you wish to copy onto the rear side of the
2
paper, and press the start (
Copying begins.
Using the SPF (AL-2041)
Press the start (
) key.
) key again.
) key. Copying begins in the selected two-sided copy mode.
32
4