A Misfeed In The Paper Feed Area; B Misfeed In The Fusing Area - Sharp AL-1451 Operation Manual

MISFEED REMOVAL

A Misfeed in the paper feed area

Gently remove the misfed paper from the paper feed area as shown in the illustration.
1
When
area, pull out the paper tray and remove the misfed paper. If the paper cannot be
removed, proceed to "B Misfeed in the fusing area".
6
Close the side cover by pressing the round projections near the side cover open
2
button. The misfeed (
up.

B Misfeed in the fusing area

Lower the fusing unit release lever.
1
Gently remove the misfed paper from under the fusing unit as shown in the illustration.
2
If the paper cannot be removed, proceed to "C Misfeed in the transport area".
34
blinks in the display and the misfed paper is not seen from the paper feed
The fusing unit is hot. Do not touch the fusing unit when removing misfed
paper. Doing so may cause a burn or other injury.
G
Do not touch the surface of the drum (green portion) of the drum cartridge
when removing the misfed paper. Doing so may damage the drum and cause
smudges on copies.
G If the paper has been fed through the manual bypass, do not remove the
misfed paper through the manual bypass. Toner on the paper may stain the
paper transport area, resulting in smudges on copies.
) indicator will go out and the ready (
Fusing unit release lever
The fusing unit is hot. Do not touch the fusing unit when removing misfed
paper. Doing so may cause a burn or other injury.
) indicator will light