Installing The Software - Sharp AL-2021 Operation Manual

INSTALLING THE SOFTWARE

1
The USB cable must not be connected to the machine. Make
sure that the cable is not connected before proceeding.
If the cable is connected, a Plug and Play window will appear. If this
happens, click the "Cancel" button to close the window and disconnect the
cable.
The cable will be connected in step 13.
2
Insert the Software CD-ROM into your computer's CD-ROM
drive.
3
Click the "Start" button, click "Computer", and then
double-click the CD-ROM icon (
• In Windows XP, click the "start" button, click "My Computer", and then
double-click the CD-ROM icon.
• In Windows 2000, double-click "My Computer", and then double-click the
CD-ROM icon.
4
Double-click the "Setup" icon (
• In Windows 7, if a message screen appears asking you for confirmation,
click "Yes".
• In Windows Vista, if a message screen appears asking you for
confirmation, click "Allow".
5
The "SOFTWARE LICENSE" window will appear. Make sure
that you understand the contents of the software license, and
then click the "Yes" button.
You can show the "SOFTWARE LICENSE" in a different language by
selecting the desired language from the language menu. To install the
software in the selected language, continue the installation with that
language selected.
6
Read the "Readme First" in the "Welcome" window and then
click the "Next" button.
7
To install all of the software, click the "Standard" button and go
to step 12.
To install particular packages, click the "Custom" button and
go to next step.
).
).
16
3