G Part Names And Functions Of Peripheral Devices; Part Names And Functions Of Peripheral Devices - Sharp AR-C170M Operation Manual

PART NAMES AND FUNCTIONS

Part names and functions of peripheral devices

Large Capacity tray (AR-LC8)
The large capacity tray provides the added
convenience of having 3,500 sheets of A4 or 8-1/2"
x 11" paper (80 g/m or 21 lbs.) available.
2
Stand/1 x 500 sheet paper drawer (AR-D17N)
This stand has one paper tray. It can hold
approximately 500 sheets of the recommended
paper for colour (80 g/m
approximately 500 sheets of SHARP standard
paper (80 g/m or 21 lbs.).
2
Duplex module/2 x 500 sheet paper drawer (AR-D19N)
This stand includes a module for automatic two-
sided printing and two paper trays. The two trays
can hold approximately 500 sheets of the
recommended paper for colour (80 g/m
or approximately 500 sheets of SHARP standard
paper (80 g/m or 21 lbs.). To perform two-sided
2
printing, a duplex bypass/inverter unit (AR-RB1) is
required.
1-6
or 21 lbs.), or
2
or 21 lbs.),
2
Stand/3 x 500 sheet paper drawer (AR-D18N)
This stand has three paper trays. Each tray can
hold approximately 500
recommended paper for colour (80 g/m
or approximately 500 sheets of SHARP standard
paper (80 g/m or 21 lbs.).
2
Saddle stitch finisher (AR-F13)
The finisher can deliver sets saddle stitched and
folded at the paper centreline to form a pamphlet*,
edge stapled in three different modes or unstapled.
For two-hole or three-hole output, a hole punch
module must be installed.
* When used for pamphlet copying, only black and
white output is possible.
20-bin sorter (AR-S11)
Copies can be collated into sets (sort mode), or
grouped by original page (group mode). When
using sort mode, up to 20 sets of copies can be
made.
Duplex bypass/inverter unit (AR-RB1)
This module is required to automatically turn paper
over within the machine for automatic two-sided
printing.
sheets of the
or 21 lbs.),
2