Replacing The Toner Cartridges - Sharp AR-C170M Operation Manual

REPLACING THE TONER CARTRIDGES

When toner runs low, "[
a set of new toner cartridges so that you can replace them quickly when toner runs out.
READY TO COPY.
([ ]TONER SUPPLY IS LOW.)
If you continue to use the toner cartridge, the
toner will eventually run out, the machine will
stop and the following message will appear.
CHANGE THE TONER CARTRIDGE.
([ ])
NOTES
G There may be cases that copy images become light or uneven before the message is displayed, depending on
the way the machine is used. If this occurs, take out the toner cartridge by following the same steps as
replacement, shake it horizontally to even out the toner in the cartridge, and re-insert the toner cartridge.
If copy images do not improve even after following this procedure, replace the toner cartridge with a new
cartridge.
G If one of the toners is out, including black toner, colour copying will not be possible. If Y, M, or C runs out but BK
toner remains, black and white copying will still be possible.
Follow these steps to replace the toner cartridge that is out of toner.
Open the front cover.
1
Yellow
Magenta
Cyan
Black
Lift the cartridge lock lever toward you.
2
] TONER SUPPLY IS LOW" appears in the display. It is recommended that you keep
Arrangement of colour
toner cartridges
Example: Replacing the
yellow toner cartridge
This indicates the colour of toner that is low.
Y = Yellow toner
= Magenta toner
M
= Cyan toner
C
= Black toner
Bk
While holding the lock lever on the toner
3
cartridge, pull the toner cartridge toward
you.
Remove a new toner cartridge from the
4
package and shake it horizontally five or
six times.
Hold the toner cartridge
with both hands as
shown in the illustration,
and pull it out of the
machine.
NOTE
Shake the toner
cartridge well to ensure
that the toner flows well
and will not stick to the
inside of the cartridge.
2-15
2