Siemens WDI1442 Instruction Manual And Installation Instructions page 42

Water drainage
Transporting the
washer dryer
42
Caution
Do not bend or pull the water drainage hose.
Height difference between the placement area and
drainage point: max. 90 cm, min. 50 cm.
Drainage into a siphon:
q Secure the connection point with a hose band clip
of 24-40 mm diameter (from specialist stores).
Drainage into a wash basin:
Caution
The plug must not block the drain of the wash basin.
q Secure the water drainage hose so that it does not
slide out.
q When water is being drained, check that the water
flow is fast enough.
i The water inlet and drain hoses can be turned to
the right or left depending on installation require
ments.
Before you transport the washer dryer (e.g. when mo
ving house)
- Turn off the tap.
- Reduce the water pressure in the water inlet hose,
page 31.
- Drain off any residual water, page 30.
- Disconnect the machine from the power supply.
- Remove the hoses.
- Remove the covers.
- Installing transportation protection devices.