Siemens WDI1442 Instruction Manual And Installation Instructions page 31

Filter in the water
inlet hose
Descaling the
washer dryer
If no water or insufficient water is running into the
washer dryer:
First, reduce the water pressure in the inlet hose:
q Turn off the tap.
q Switch off the washer dryer.
q Remove the plug from the socket.
q Remove the hose from the tap.
q Clean the filter with a small brush or paint brush.
q Connect the hose.
q Open the water tap.
q Check whether water is leaking out of the end of
the hose connected to the tap.
If water is still discharged, check that the strainer is
attached properly.
Caution
Descaling agents contain acids which may corrode
the components of the washer dryer and discolour the
washing.
Provided that you use the correct amount of
detergent, it is not necessary to descale the washer
dryer.
If descaling is nevertheless required, please follow the
instructions supplied by the manufacturer of the
descaling agent.
31