Siemens WDI1442 Instruction Manual And Installation Instructions page 16

Time-controlled drying
Special
programmes
16
The drying duration is the drying time you have set.
Set the drying time using the Y dry button, check the
type of fabric, page 21.
Reduce the drying temperature using the Z delicate
drying button.
Rinse+Spin K+B
For an additional rinse cycle turn the programme
selector to rinse+spin K+B. Select the required spin
speed.
If the laundry is to be removed dripping wet, set the
spin speed to 000 prior to starting this programme.
For use fabric softener or starch fill the additives in
dispenser 2 (3) before starting the programme.
Softening
q Fill the softener agent in dispenser 2 (3).
q Set programme selector to rinse+spin K+B.
q Press the M Start button.
Starching
For cotton and linen items.
Do not use fabric conditioner before starching.
q Dissolve starching agent in water. Follow the ma
nufacturer's instructions on the package.
q Fill the starch in dispenser 2 (3).
q Set programme selector to rinse+spin K+B.
q Press the M Start button.
If the laundry is to be dried in the washer dryer subse
quent to the starching cycle, add approx. 30 to 50 %
more starch, and select the b+B empty+spin pro
gramme with the maximum spin speed to attain the
highest degree of water extraction.
Fluff removal (after the drying programme)
When drying particularly fluffy items such as new terry
towels, the rinse+spin K+B programme should be
carried out to ensure that any deposits left by the fab
ric are removed and are not deposited on the clothes
in the next wash.