Siemens WDI1442 Instruction Manual And Installation Instructions page 30

Detergent pump
Opening the service flap
Draining the water
Replace the service flap
and close firmly
30
Detergent has not been completely pumped away.
The pump may be blocked by foreign bodies or lint.
d Risk of scalding!
Allow hot detergent to cool.
Keep children and pets away from the washer dryer.
q Set the programme selector to m off.
q Using a coin, turn the plastic covers in an
anti clockwise direction.
q Remove the drain hose from its holder and pull out
of the housing.
q Pull out cover cap B and allow water to flow into a
container positioned beneath it.
i Depending on the water quantity it may be
necessary to empty the container several times.
q When there is no more water flowing out, replace
cover cap B and push the hose back into place.
q Unscrew pump cover D in an anti clockwise
direction. More water will flow out.
q Remove detergent residues, foreign bodies and
lint from the inside, and clean the interior. The
pump impeller must be able to turn freely.
q Remove detergent residues, foreign bodies and
lint from the pump cover thread and pump
housing.
q Replace the pump cover and screw firmly in place.
q First replace the lower part of the service flap.
Using a coin, turn plastic cover a
anti clockwise.
i The slots in the covers must be horizontal.
1
/ turn
4