Siemens WDI1442 Instruction Manual And Installation Instructions page 25

Dry only
Setting a drying
programme
Pausing the drying
programme
Stopping the drying
programme
i The tap must remain open during the drying cycle,
as cold water is needed.
i The maximum permitted load for drying is 2.5 kg.
i For hand washed items select a separate spin
cycle.
q Set the programme selector to dry Y.
q Press the dry Y button repeatedly until the
required drying time is set, page 20.
q Press the delicate drying Z button to set low
heat if desired, page 21.
q Press the Start/Stop M button.
The LED monitor lights up. The remaining time
appears in the display.
i The drying programme can be paused at any time
during the cycle.
q Press the Start M button for approx. 3 sec.
The display alternates between STOP and ---.
The Start M LED flashes.
Continuing the programme:
Press the Start M button again.
Opening the door
d Risk of burning!
Depending on the drying programme, the washing
can be very hot.
q Press the door h button on the front panel.
i The door can be opened after approx. 3 minutes.
Press the Start M button during the programme cycle
and keep pressed until 0000 appears in the display
(approx. 8 seconds).
25