Washing And Drying - Siemens WDI1442 Instruction Manual And Installation Instructions

Washing and drying

Opening the door
Loading the washer dryer
This washer dryer allows
- wash only
- dry only
- wash+dry
programmes to be set.
In the wash+dry programmes, the cycle shifts auto
matically from washing to drying without having to
touch the controls to continue the cycle after washing.
q Press the door h button to open the door.
d Risk of explosion!
Laundry items which have been pretreated with deter
gents containing solvents, e.g. stain remover or clea
ner's solvent, must be rinsed out thoroughly by hand
before they are placed in the washer dryer, otherwise
there is a risk of explosion!
Warning
Before loading the washer dryer, ensure that no
foreign matter or pets are in the drum.
q Place the laundry loosely and unfolded in the
drum. Mix large and small items.
q Please observe the maximum drum loads for the
different wash and drying programmes, pages 8
and 9.
q Ensure that no items of laundry are jammed
between the door and the rubber seal.
q Close the door by pressing it shut until it engages
audibly.
q Measure and fill detergent for wash only or
wash+dry programmes.
q Open the water tap.
23