Musical Room Calibration - Samsung HW-D7000 User Manual

Blu-ray av receiver system
Hide thumbs Also See for HW-D7000:
Table of Contents

Advertisement

Available languages

Available languages

Setup

Musical Room Calibration

By setting the Musical Room Calibration (MRC)
function just once when you relocate or install the
product, you can have the product automatically
recognize the distance between speakers, levels
between channels, and frequency characteristics
to create a 7.1-channel sound fi eld optimized for
your environment.
ASC MIC
VIDEO
AUDIO
PHONES
AUX 1 IN
Musical Room Calibration Mode
You will hear either the Musical Room Calibration
mode or the User Speaker Settings.
Off: You will hear sound in the Speaker Setting
value.
On: You will hear sound in the Musical Room
Calibration mode.
Measurement
1.
Plug the ASC microphone into the ASC IN jack.
2.
Place the ASC microphone at the listening position.
Musical Room Calibration will be automatically
set up in the following sequence:
Front L
Center
R
Surround Back R
L
Surround L
Press the RETURN button to cancel the
Musical Room Calibration Setting.
42
English
HW-D7000_XAC_0516.indd 42
HW-D7000_XAC_0516.indd 42
ASC
AUDIO
PHONES
MIC
VIDEO
3D
SOUND
ASC
AUX
1 IN
ASSIGN
AUDIO
EFFECT
AUDIO
RETURN
MEMORY
MENU
SELECT
AV
SYNC
TUNING
MODE
microphone
TONE
HUB
Smart
vTuner
CONTROL
Front R
Surround
Surround Back
Subwoofer
NOTE
Running the Musical Room Calibration
function takes about 3 minutes.
Make sure there is no disc in the product when
you run the Musical Room Calibration function.
If the ASC microphone is disconnected during the
Musical Room Calibration setup, the setup will be
canceled.
If the product is connected to external devices or
other components (such as an iPod, AUX, D.IN),
the Musical Room Calibration Setup may not work
properly.
Noise may result in incorrect measurements.
Ensure the room is quiet when you run the
Musical Room Calibration.
Place the microphone in the main listening
position.
Make sure there are no objects between the
speakers and microphone.
Note that the test tones of the speakers may be
loud.
Do not place the microphone behind furniture or
too close to the wall. Otherwise, it can produce an
incorrect test result.
2011-05-16
2011-05-16
3:46:25
3:46:25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents