Samsung HW-D7000 User Manual page 17

11
TONE CONTROL BUTTON
12
SMART HUB BUTTON
13
S.DIRECT BUTTON
14
vTuner BUTTON
15
AV SYNC BUTTON
16
TUNING MODE BUTTON
17
SELECT BUTTON
18
MEMORY BUTTON
19
MENU BUTTON
UP(,), DOWN(.), LEFT(<),
20
RIGHT(>) BUTTONS
21
RETURN BUTTON
22
AUDIO ASSIGN BUTTON
23
AUDIO EFFECT BUTTON
24
3D SOUND BUTTON
25
ASC MIC JACK
26
USB PORT
27
AUX 1 IN JACKS
28
PHONES JACK
✎
NOTE

You must use a USB memory fl ash stick to perform a software upgrade using the USB Host jack.

When the product displays the Blu-ray disc menu, you cannot start the movie by pressing the PLAY button on the
product or the remote. To play the movie, you must select Play Movie or Start in the disc menu, and then press the
ENTER button.
HW-D7000_XAC_0516.indd 17 HW-D7000_XAC_0516.indd 17
Used to set the bass, treble level and tone to on/off.
Display the Smart Hub service screen.
Used to select the S.DIRECT mode.
(Output the original signal as it is without applying the sound fi eld effect or any
other sound effect.)
Used to select the vTuner.
Used to set the Audio Delay.
Used to select the Manual or Preset mode for FM radio.
Used to change the radio frequency.
Used to set a preset radio frequency.
Display the home menu screen.
Used to move the cursor up, down, left or right.
Return to the previous menu.
Toggles to select an input mode for the selected source.
Toggles to select a surround sound mode.
Used to set the 3D sound.
Used to connect the ASC Microphone for setting up MRC (Musical Room Calibration).
You can connect a USB memory fl ash stick here and use it as storage when the product is
connected to BD-LIVE. You can also use the USB Host for software upgrades and MP3/
JPEG/DivX/MKV/MP4 playback.
Auxiliary AV input terminals used to connect a camcorder, portable DVD player
or gaming device.
Used to connect a set of headphones or earphones.
17
English
2011-05-16 2011-05-16 3:45:18 3:45:18