Adjusting The Playback Picture; Changing Audio During Playback; On-Screen Display Indicators - Panasonic Diga DMR-EX98VEB Operating Instructions Manual

Adjusting the Playback Picture

Manual Tracking
The unit usually makes tracking adjustments
automatically, but you may need to do it manually if
noise appears on a tape recorded on other equipment.
During playback
or
Press and hold until the picture noise
disappears.
To return to auto tracking:
(simultaneously).
Tips
To remove the noise from a paused picture:
Start slow-motion (➔ 46), then adjust the tracking.
Notes
• This function may not work with some tapes.
• You can also adjust the tracking with [CH 1, 2] on the main unit.
Vertical Locking Adjustment
Adjust the vertical synchronisation to stop the picture
from shaking while paused.
While paused
or
Press and hold until the shaking
stops.
To return to the standard position:
(simultaneously).
Notes
• This function may not work with some tapes.
• You can also adjust vertical synchronisation with [CH 1, 2] on the
main unit.

Changing Audio during Playback

Press and hold for about 5 or
more seconds.
The audio changes as follows.
L R (Stereo) L
No display (Normal audio track)

On-screen Display Indicators

to display on-screen indicators.
VHS
VHS drive indicator
L and R indicators
The Left (L) and Right (R) indicators show which sound mode
is selected as follows:
L R (Stereo): Hi-Fi stereo audio
L –: Mono L audio of the Hi-Fi stereo audio
– R: Mono R audio of the Hi-Fi stereo audio
– – (Normal): Normal audio
Recording mode (➔ 28)
Operation status
Shows the tape counter and remaining tape time
Pressing [STATUS ] to cycle the display as follows:
No display Tape counter
Remaining tape time
• Press [ DELETE] to reset the tape counter (elapsed time)
to "0:00.00". The tape counter is automatically reset when
inserting a video cassette.
Tips
To exit on-screen indicators
Press [STATUS ] several times.
Notes
Remaining tape time display
• The displayed time is approximate.
• The displayed time will be incorrect if you set the wrong tape length
in "Tape Length" in the Setup menu (➔ 83) and if the tape is of poor
quality.
R
LR SP
0:00.22
47
RQT9089