Copying Titles (Vhs ➔ Hdd Or Dvd) - Panasonic Diga DMR-EX98VEB Operating Instructions Manual

Copying Titles (One Touch Copy)
Refer to "Copying titles or playlists" (➔ 62 to 69) for detail information on
copying.
Copying Titles (VHS ➔ HDD or DVD)
Programmes are automatically copied onto the HDD or disc from the location
of playback at the time when the copying of the tape starts.
➔
VHS HDD RAM -R -RW(V) +R +RW
Preparation:
• Turn on the television and select the appropriate video input to suit the
connections to this unit.
• If the disc is protected, release protection (➔ 76).
RAM
• Insert a disc with enough space for recording.
• Select the HDD or DVD drive (➔ 20).
• Select the HDD or DVD recording mode (➔ 28).
• Insert the video cassette containing the programme to be copied.
• Press [ q PLAY] to play the video cassette and then press and hold [STTL
for about 5 or more seconds to select the audio type you wish to record.
• Stop the tape at the point where you want to start copying from.
On the main unit
While both HDD or DVD and VHS are stopped
When copying from
VHS to HDD
When copying from
VHS to DVD
-R -RW(V) +R
2a
– or –
2b
− Check if copying starts properly ("COPY" lights on the unit's display).
− Copying is automatically completed when the tape reaches its end or the
disc becomes full.
Tips
• Dividing a title to be copied
When copying from VHS to HDD or DVD, titles on the HDD or DVD are divided according to
index signals detected on the tape.
− Titles that are too short may not be divided correctly.
− The recording time may become longer than the original title depending on the number of
index signals.
• To cancel copying in the middle
Press [ g STOP].
− You can also press and hold [RETURN] for about 3 or more seconds to cancel copying in the middle.
24
However, you cannot stop finalising after it has started.
RQT9089
Press and hold for about
3 seconds.
to copy and automatically finalise
when done
(see page 77 for more information on finalising)
− If you press [ g STOP], you can cancel copying.
to copy without finalising.
− If you press [ g STOP], you can cancel copying.
COPYING indicator
]
2b
.
2a
Notes
• If copying doesn't
-R -RW(V) +R
complete due to shortage of remaining
time, disc space, or other reasons,
finalising won't start.
• When copying doesn't start, the
"COPYING" indicator on the main unit
blinks for about 7 seconds. Check if the
unit is properly prepared.