S-Vhs Quasi Playback (Sqpb); Repeat Playback; Changing Audio During Playback; Adjusting The Playback Picture - Panasonic DMR-EA38V Operating Instructions Manual

S-VHS Quasi Playback (SQPB)

This unit can play tapes recorded in S-VHS.
 Some picture noise may occur depending on the type
of tape used.
 It is not possible to fully obtain the high resolution
S-VHS is capable of.
 This unit cannot record in S-VHS.

Repeat Playback

When the tape reaches the end of the program, it will
automatically rewind to the beginning and play again.
During playback or while stopped
PLAY
Press and hold for about 5 or
more seconds.
– Repeat Playback goes on indefinitely until you
cancel it.
– The "RPt" indication appears on the unit's display.
– Press [ STOP] to stop play.
Notes
Only works if there is at least 5 seconds blank space at the end of
the program.

Changing Audio during Playback

AUDIO
A
repeatedly, to select the audio
option.
Stereo  Mono L  Mono R
 No display (Normal audio track) 
Downloaded From DvDPlayer-Manual.com Panasonic Manuals

Adjusting the playback picture

Manual Tracking
The unit usually makes tracking adjustments
automatically, but you may need to do it manually if noise
appears on a tape recorded on other equipment.
During playback
TRACKING/V-LOCK
TRACKING/V-LOCK
CH
CH
or
– Repeat until the picture noise disappears.
To return to auto tracking:
TRACKING/V-LOCK
CH
(simultaneously).
Tips
To remove the noise from a paused picture:
Start slow play ( 34), then adjust the tracking.
Notes
 This function may not work with some tapes.
Vertical Locking Adjustment
Adjust the vertical synchronization to stop the picture
from shaking while paused.
While paused
TRACKING/V-LOCK
TRACKING/V-LOCK
CH
CH
or
– Repeat until the shaking stops.
To return to the standard position:
TRACKING/V-LOCK
CH
(simultaneously).
Notes
 This function may not work with some tapes.
35