Table Of Contents; Features - Pioneer M-AX10 Operating Instruction

TABLE OF CONTENTS

PREPARATIONS
OPERATION
APPENDIX

FEATURES

• Choice of three speaker drive modes: bridge, dual and separate
High-power design with two 230 W / 6 Ω (DIN), 200 W / 6 Ω (FTC) channels in bridge mode, or four
110 W / 3 Ω (DIN), 90 W / 3 Ω (FTC) channels in dual and separate modes.
• With DAC (Digital Accurate Control) attenuator
Attenuation is achieved by switching trimmed high-precision resistors. There is no gang error
between the right and left channels, nor is there any increased impedance resulting from the
position of the attenuator, as is seen in conventional types. S/N is maximised and separation is
minimised.
In dual and bridge modes the DAC attenuator functions as a volume control, and in separate mode
as an attenuator (0 to -15 dB, in 0.5 dB steps). In either case, it facilitates adjustment in 31 stages.
• Hybrid brass stay construction
Highly rigid hybrid brass stays with high specific gravity impart greatly increased rigidity to the
chassis, permitting it to retain a power supply transformer, electrolytic capacitor, heat sink and
similar heavy items.
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Before you begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Names and functions of the different parts . . . . . . . . . .7
Rear surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Front surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Connecting and operating . . . . . . . . . . . . . . . . . . . . . . .10
Bridge connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
How to operate in bridge connection mode . . . . .11
Dual connection . . . . . . . . . . . . . . . . . . . . . . . . . . .12
How to operate in dual connection mode . . . . . . .13
Separate connection . . . . . . . . . . . . . . . . . . . . . . . .14
How to operate in separate connection mode . . .15
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
5