Connecting Handset; Connecting The Telephone Cord; Connecting The Power Cord; Inserting Ink Cartridge - Philips FaxJet 520 User Manual

Connecting handset

(IPF¦525, IPF¦555) Type 3 (mit Telefon)
Plug one end of the spiral cable into the socket on the tel-
ephone handset. Put the other end into the socket at the
device bottom marked with ) symbol.
EN
Telefonhörer anschließen

Connecting the Telephone Cord

Connecting the Telephone Cable
Connect the telephone cord to the device by inserting it in
the socket designated with LINE (RJ-11-Connector). In-
sert the telephone plug into your telephone connection
socket.
Telefonkabel anschließen
PABX Systems 1
If you connect your device as extension to a tele-
phone system, you must set it for working as an ex-
tension (also see Chapter "Telephone connections
and additional devices, page 30).

Connecting the Power Cord

Mains Voltage at Setup Location
Check whether the mains voltage of your device (in-
dicated on the type label) matches the mains voltage
available at the setup location.
Connecting the Mains Cable
Insert the mains cable into the connection located on the
rear side of the device. Connect the mains cable to the elec-
trical socket.
Netzkabel anschließen Faxjet
4

Inserting ink cartridge

1 Open the control panel, by lifting and folding it up in
the centre. Click the control panel completely in place.
2 Open the cartridge compartment by pressing on the
upper right corner of the document holder (arrow) and
then carefully lifting it backwards. Click the document
holder completely in place.
3 Remove the cartridge from the packing and remove the
protective strips.
Please make certain that the protective strip has
been completely removed. Be careful not to touch
the nozzles or contacts.
4 Insert the cartridge into the holder with the coloured
end facing front and the contacts facing down.
Philips IPF 520 · 525 · 555