Philips Fax Machine Manual page 18

If you want to improve the image quality you can choose bet-
ween the options FINE f f f f f (for small print or fine drawings) and
F F (for photographs and pictures). Press FINE/ F F
PHOTO F
PHOTO as often as needed until the symbol for the desired
resolution lights up. Document transmission will take longer in
the FINE/PHOTO operating mode. After transmitting or, if
there is no document in the feed slot, after 40 seconds the fax
machine will automatically return to standard resolution.
The factory default for this feature has been set to medium.
With function 47 you can adjust the contrast quality (bright-
ness) for documents you want to copy or send as a fax message,
e.g. dark photos or forms with coloured background.
Press MENU, 47 and OK.
With </> you can choose between three different options:
Confirm your choice with OK.
Your fax machine can print a transmission report every time you
have sent a document. This way you are given confirmation that
your document has been received. If an error occurs during trans-
mission you will be informed on the error report. The printing
of a transmission report can be switched on and off while the
error report is always printed.
Call up function 43. Press MENU 4 3 and OK.
Select with </> and confirm with OK.
Your fax machine automatically adjusts its transmission speed to
the quality of the telephone line. Especially in case of overseas
transmissions this process can take more time. If the poor line
quality is already known it is useful to set the machine at a slower
speed from the very beginning using function 21. This will save
time and charges the automatic adjustment would require.
Press MENU, 2 1 and OK.
Select a slower speed with </> and confirm with OK.
To make sure that received faxes that are slightly longer than A4
size are printed on one page, these pages are slightly reduced ver-
tically. If you do not wish to use this facility, you can switch off
reduction using function 46.
Press MENU, 4 6 and OK.
Select with </> and confirm with OK.
The fax journal is a list of the last ten received and transmitted
faxes.
Call up function 41 by pressing MENU, 41 and OK.
Select with </> if, and when the fax journal will be
printed out (immediately or after ten transmissions).
Confirm your choice with OK.
By means of this function documents which have been prepared
for collection from another fax machine can be retrieved.
Dial the desired number with the handset replaced and press
START for a longer time.
In case you want to enter a sub address or a code as well
(check polling with code) enter the telephone number first
and close with R. Attach the desired sub address or code and
press START for a longer time. (e. g.
12345R17).