Philips Fax Machine Manual page 11

If you press a wrong key by mistake, press the STOP
key as often as necessary to return to the original
position.
If you want to keep a note of the factory settings on your
machine for later, we recommend printing out a function
list before you change any of the settings (press MENU
three times).
If you want to delete your individual settings, you can do
so in function 45 Service code (see chapter Hints and
Tips / Service code).
"Your name" and "your telephone number" are transmit-
ted at the top of each page (the first 4 mm) together with
the date, time and page number.
Press HELP/INSTALL twice. You will receive a printout
explaining how to use the most important functions. It also
specifies how to obtain further HELP pages concerning
other features of your fax machine.
Select function 12 by pressing MENU and numbers 1 and
2.
Press OK.
Enter the correct time using the number keys (e. g.
0915 for 9:15). Your fax machine will now ask you
for the correct date (e. g. 150500 for May 15,
2000).
Press OK.
Use # or * to enter the "+", that is often used in international
fax numbers in front of the country code, and > to enter a space.
The maximum number of digits you can use for your number is
20.
Select function 13 by pressing MENU and numbers 1
and 3.
Press OK.
Enter your telephone or fax number (Country codes: UK
+44, Ireland +353, Hong Kong +852, Singapore +65).
Press OK. Your number is now stored.
When you enter a name (maximum 32 digits), the number keys
are used to enter letters. Every key has a number of different
characters. The table on the following page shows which charac-
ters are entered by which key. Every time you press a particular
key you will call up the next character. After the last character the
sequence starts again from the beginning.
Select function 14 by pressing MENU and numbers 1
and 4.
Press OK.
Enter your name by using the dial pad (see next page).
Confirm with OK. Your name is now stored.
If you have entered a wrong letter or number in function 13 or
14 you can correct the mistake during the entering as well as
later. If you want to make your corrections later you have to
select the functions for entering numbers or names once again.
Position the cursor on the right side of the character you
want to change with </>. Press CLEAR to delete the
character. A long press on CLEAR will delete the whole line.
Now enter the correct characters by using the keyboard.
Confirm with OK.