Pentax OPTIO L50 Operating Manual page 192

Message
Data being recorded
Data being processed
Built-in memory full
No image to be
processed
This image/sound
cannot be processed
No card in the camera
The
built-in memory is not
enough to copy
images/sounds
Cannot process
correctly
Display image/sound
from
built-in memory
Green mode must be
canceled to use this
function.
Messages such as the following may appear on the display when using
the PictBridge function.
Message
Low paper level in the
printer
No paper in the printer
9
Paper stuck in the printer
Low ink level in the printer
No ink in the printer
Printer error
Data error
Connection error
Check printer
Printing now
190
This message appears when you try to switch to Q mode
while an image is still being recorded, or when the protect
setting or DPOF setting is being changed. It disappears
after the image is recorded or the setting is changed.
This message appears when the camera takes more than
five seconds to display an image due to image processing,
or when the SD Memory Card or built-in memory is being
formatted.
Displayed if the built-in memory is full when saving a file.
Displayed when there are no image or sound files.
Displayed for files that cannot be processed.
Displayed when no SD card is inserted.
Displayed when there is insufficient built-in memory to
perform copying.
Displayed when Red-eye Compensation processing fails.
Displayed when the camera enters built-in memory display.
Displayed when you try to use a function not supported by
the Green Mode.
The paper level of the printer is low.
There is no paper in the printer.
The paper is stuck in the printer.
The ink level of the printer is low.
There is no ink in the printer.
An error message has been sent from the printer.
A data error message has been sent from the printer.
Displayed when a PictBridge connection fails.
Displayed when printing is being executed.
Description
Description