Using The Ac Adapter - Pentax OPTIO L50 Operating Manual

1

Using the AC Adapter

Use of the AC adapter kit K-AC78 (optional) is recommended if you
intend to use the camera for a long time or connect it to a PC.
1
Make sure that the camera is turned off and open the
battery/card cover.
2
Remove the Battery.
Refer to p.24 on how to open/close the battery/card cover and remove
the battery.
3
Insert the DC coupler.
Using the side of the DC coupler to press the battery/card cover lock
lever, insert the DC coupler. Confirm the DC coupler is locked in place.
4
Extract the DC coupler cord.
Pull out the tab at the joint of the camera and the battery/card cover so
that the DC coupler cord extracts from there.
5
Close the battery/card cover.
6
Connect the DC terminal of the AC adapter to the DC
terminal of the DC coupler.
7
Connect the AC plug cord to the AC adapter.
8
Plug the AC plug cord into the power outlet.
26
1
AC plug cord
8
7
AC adapter
6
DC terminal
4
3
DC coupler