Panasonic KX-FC268FX Operating Instructions Manual page 45

7.2.1 Cordless handset features
Top-menu
"Handset Setup"
"Base Unit
Setup"
*1 When this setting is changed using the cordless handset, the setting for the base unit will also be changed,
and vice versa.
*2 This setting can be changed individually for the base unit and the cordless handset.
– To set the base unit ringer volume, see page 19.
– To set the base unit ringtone for outside calls, see feature #17 on page 40.
– To set the base unit LCD display contrast, see feature #39 on page 42.
*3 When the ringer volume is turned OFF,
However even when the ringer volume is set to OFF, the cordless handset rings:
– at the low level for alarm (page 46) and intercom calls (page 48)
– at the high level for paging (page 48)
*4 If you select one of the melody ringer tones, the ringer tone continues to play for several seconds even if the
caller has already hung up. You may either hear a dial tone or no one on the line when you answer the call.
*5 The preset melodies in this product are used with permission of © 2007 Copyrights Vision Inc.
*6 Turn this feature OFF if you prefer not to hear key tones while you are dialling or pressing any keys, including
confirmation tones and error tones.
*7 If you change the PIN, please make note of your new PIN. The unit will not reveal the PIN to you.
*8 If you forget your PIN, consult your nearest Panasonic service centre.
Sub-menu 1
"Time Settings"
"Ringer Setup"
*2
"Display Setup"
"Register H.set"
*6
"Keytones"
"Auto Talk"
"Base Unit PIN"
"Repeater"
is displayed and the cordless handset does not ring for outside calls.
Sub-menu 2
*1
"Set Date/Time"
"Alarm"
*2 , *3
"Ringer Volume"
*2 , *4 , *5
"Ringtone"
"Language"
"Contrast"
–
–
–
–
–
7. Programmable Features
Feature (default setting)
Date and time: page 19
Set the alarm: page 46
Cordless handset ringer volume
(Maximum): page 19
Ringtones for outside calls
("Ringtone 1")
Display language ("English"):
page 46
LCD display contrast
(Level 3)
page 47
Keytones ON/OFF ("On")
Auto talk ON/OFF ("Off"):
page 22
Change base unit PIN ("0000").
Enter the current 4-digit base unit
*8
PIN.
A Enter the new 4-digit base unit
PIN. A
("Off") page 47
*7
45