Table of Contents
Advertisement
1. Introduction and Installation
K Document exit
L Speaker
M Green button (Back cover release button)
N Back cover
Removing the shipping tape
* The pictured model is KX-FC278.
Note:
R Shipping tape positions are subject to change without
notice.
1.6.2 Cordless handset
A
B
A Charge indicator
Ringer indicator
B Speaker
C Receiver
D Microphone
E Charge contacts
12
C
D
E
1.7 Ink film
The included film roll is a starter ink film.
1
Open the front cover.
2
Release the back cover by pushing the green button
(A).
3
Open the back cover.
4
Insert the blue gear of the ink film roll into the front
left slot of the unit (B) and the white gear of the ink
film roll into the rear left slot of the unit (C).
R The ink film is safe to touch and will not rub off on
your hands like carbon paper.
A
Advertisement
Table of Contents
