Sync; H-Freq. (Khz)/V-Freq. (Hz) - Panasonic TH-42PHD6BX Operating Instructions Manual

Setup for input signals

Sync

Select Signal from the "Setup" menu during RGB input signal.
R
Press to exit from adjust mode.
Note:
Sync cannot be adjusted while a DVI signal is being applied.
Setting RGB sync signal:
Confirm that the input is set to RGB input (this setting is valid only for RGB input
signal).
H & V: The H and V sync signals are input from the HD/VD connector.
on G: Uses a synchronized signal on the Video G signal, which is input
from the G connector.
CS: Uses a synchronized signal of Composite Sync input.
Note:
It is not possible to use a composite video signal to synchronise on RGB picture ( for example, RGB from a DVD
player).

H-Freq. (kHz)/V-Freq. (Hz)

Displays the H (Horizontal)/V (Vertical) frequencies.
This display is valid only for RGB/PC and DVI input signal.
Display range:
Horizontal 15 - 110 kHz
Vertical 48 - 120 Hz
32
Press to adjust.
Setup
Component/RGB-in select
RGB
RGB1
Input label
Signal
Screensaver
Power save Off
Standby save On
Power management Off
English ( UK )
OSD Language
Press (ACTION) button
Signal
Sync H & V
H-Freq. 31.5 kHz
V-Freq. 60.0 Hz
Sync H & V
Sync on G
Sync CS
H-Freq. kHz
31.5
V-Freq. 60.0 Hz
1/2
[ RGB ]