Connections - Panasonic TH-42PHD6BX Operating Instructions Manual

Connections

When connecting the speakers, be sure to use only the optional accessory speakers.
Refer to the separate speaker 's Installation Manual for details.
Speakers (Optional accessories)
SPEAKERS
Terminals (R)
– Cable fixing bands Secure any excess cables with bands as required.
Pass the attached cable
fixing band through the
clip as shown in the
figure.
1
Optional Terminal Board insert Slots (covered)
SLOT1
Mains lead connection
(see page 12)
– Mains lead fixing
1. Open the clamper.
Clamper
Note: The Mains plug in the illustration may not be the type fitted to your set.
To secure cables connected to Terminals, wrap the cable fixing band around
them then pass the pointed end through the locking block, as shown in the
figure.
While ensuring there is sufficient slack in cables to minimize stress
(especially in the power cord), firmly bind all cables with the supplied
fixing band.
2
SLOT2
SPEAKERS
Terminals (L)
2. Insert the Mains lead
and close the clamper
securely.
Mains lead
To tighten:
Pull
SLOT3
From EXTERNAL monitor terminal
on Computer (see page 8)
1
2
2
3. Slide up the clamper and fix
the Mains plug securely.
When loosen
the clamper:
To loosen:
Push the catch
AUDIO
PC IN SERIAL
From SERIAL terminal
on Computer
1
Pull
7