Caller Id Service; Using Caller Id Service - Panasonic KX-TG7521E Operating Instructions Manual

TG7521E(e).book Page 33 Friday, January 22, 2010 8:46 AM

Using Caller ID service

Important:
L This unit is Caller ID compatible. To
use Caller ID features, you must
subscribe to a Caller ID service.
Contact your service provider/
telephone company for details.
Caller ID features
When an outside call is being received,
the caller's phone number is displayed.
Caller information for the last 50 callers
is logged in the caller list from the most
recent call to the oldest.
L If the unit cannot receive caller
information, the following is displayed:
– "Out of Area": The caller dials
from an area which does not
provide a Caller ID service.
– "Private Caller": The caller
requests not to send caller
information.
L If the unit is connected to a PBX
system, caller information may not be
properly received. Contact your PBX
supplier.
Missed calls
If a call is not answered, the unit treats it
as a missed call and y is displayed. This
lets you know if you should view the
caller list to see who called while you
were away.
Even if only one missed call in the caller
list is viewed (page 34), y disappears
from the display. When you receive
another new call, y is displayed again.
Note:
L Even when there are unviewed
missed calls, y disappears from the
standby display if the following
operation is performed by one of the
registered handsets:
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333

Caller ID Service

– Being replaced on the base unit or
charger.
– Pressing {ic}.
Phonebook name display
When caller information is received and
it matches a phone number stored in the
phonebook, the stored name in the
phonebook is displayed and logged in
the caller list.
Category ringer tone for
phonebook
This feature can help you identify who is
calling by using different ringer tones for
different categories of callers. When
adding an entry to the phonebook, you
can assign it to the desired category
(page 19). When a call is received from a
caller assigned to a category, the ringer
you selected for that category rings after
caller information is displayed.
If you select "Default Ringer", the
unit uses the ringer tone you selected on
page 24 when calls from this category
are received. The default setting is
"Default Ringer".
1
n i 1
2
{V}/{^}: "Category" i M
3
{V}/{^}: Select the desired category.
i M
4
{V}/{^}: Select the current setting of
the category ringer tone. i M
5
{V}/{^}: Select the desired ringer
tone. i M
6
{ic}
33