Remote Operation - Panasonic KX-TG7521E Operating Instructions Manual

TG7521E(e).book Page 43 Friday, January 22, 2010 8:46 AM
*2 When you play a message from the
message list, the unit stops message
playback and the display goes back to
the message list.
*3 To resume playback: {V}/{^}: "Play"
i M
*4 You can also erase as follows:
W i {V}/{^}: "Yes" i M
Calling back (Caller ID
subscribers only)
If caller information is received for the
call, you can call the caller back while
listening to a message.
1
Press 1 during playback.
2
{V}/{^}: "Call Back" i M
Editing the number before calling
back
1
Press 1 during playback.
2
{V}/{^}: "Edit & Call" i M
3
Edit the number. i {C}
Erasing all messages
1
1 i {#}{3}{2}{5}
2
{V}/{^}: "Yes" i M i {ic}

Remote operation

Using a touch-tone phone, you can call
your phone number from outside and
access the unit to listen to messages or
change answering system settings. The
unit's voice guidance prompts you to
press certain dial keys to perform
different operations.
Remote access code
A 3-digit remote access code must be
entered when operating the answering
system remotely. This code prevents
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Answering System
unauthorised parties from listening to
your messages remotely.
Important:
L In order to operate the answering
system remotely, you must first set a
remote access code.
1
1 i {#}{3}{0}{6}
2
To turn on remote operation, enter
the desired 3-digit remote access
code.
3
M i {ic}
Deactivating remote operation
Press {*} in step 2 on "Remote access
code", page 43.
L The entered remote access code is
deleted.
Using the answering system
remotely
1
Dial your phone number from a
touch-tone phone.
2
After the greeting message starts,
enter your remote access code.
L The unit announces the number of
new messages.
3
Follow the voice guidance prompts
as necessary or control the unit
using remote commands (page 44).
4
When finished, hang up.
Note:
L You can also leave a message just as
any outside caller can. After the
greeting message starts, press {*} to
skip the greeting message and record
your message after the beep.
Voice guidance
During remote operation, the unit's voice
guidance starts and prompts you to
press {1} to perform a specific
43