Table of Contents
Advertisement
Displaying PC Screen on TV
The screen of the PC connected to the TV can be displayed on the TV.
You can also listen to PC sound with the audio cable connected.
•
To connect PC
(p. 109)
■
To return to TV
TV
PC menu setting
•
To make settings
"How to Use Menu Functions" (p. 35)
Menu
Item
Input Resolution
Clock
H-pos
V-pos
Clock Phase
Sync
Reset to Defaults
•
Other items
(p. 36 - 45, 69)
Note
•
For HDMI-compatible PC, possible to connect to HDMI terminals (HDMI1 / HDMI2 / HDMI3 / HDMI4) by using HDMI cable
(p. 115).
Select the external input
1
AV
Select [PC]
2
Input Selection
AV1
AV2
COMPONENT
PC
HDMI1
HDMI2
HDMI3
HDMI4
TV
SD Card/USB
Adjustments / Configurations (options)
Switches to a wide view
•
VGA (640 × 480 pixels), WVGA (852 × 480 pixels), XGA (1,024 × 768 pixels),
WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)
•
Options change depending on signals
Set to the minimum level if noise occurs
Adjusts horizontal position
Adjusts vertical position
Eliminates flicker and distortion
•
Adjust after Clock adjustment
•
Set to the minimum level if noise occurs
Chooses another synchronous signal if the image is distorted
[H & V] / [On Green]
[H & V] : by the horizontal and vertical signals from your PC
[On Green] : by the green signal from your PC (if available)
Press the OK button to reset to the default PC Setup settings
select
access
•
Corresponding signals
(p. 117)
•
If [H-freq.] or [V-freq.] is shown in red, the signals
may not be supported.
67
Hide quick links:
Advertisement
Table of Contents
