Table of Contents
Advertisement
Displaying PC Screen on TV
The screen of the PC connected to the TV can be displayed on the TV.
You can also listen to PC sound with the audio cable connected.
•
To connect PC
p. 38
INPUT
OPTION SD CARD
EXIT
RETURN
■
To return to TV
■
PC menu setting (changed as desired)
•
To make settings
Menu
Item
R-Gain
G-Gain
Advanced
B-Gain
PC
Settings
Gamma
Reset to
Default
Input
Resolution
Clock
H-pos
PC
Setup
V-pos
Clock Phase
Sync
Reset to
Default
•
Other items
p. 20 and p. 21
Select the external input
1
Select "PC"
2
Input Selection
AV1
AV2/S
AV3/S
COMPONENT
PC
HDMI1
HDMI2
HDMI3
TV
"How to Use Menu Functions"
Adjustments / Configurations (options)
Adjusts the white balance for red areas
Adjusts the white balance for green areas
Adjusts the white balance for blue areas
(2.0 / 2.2 / 2.5)
Press the OK button to reset to the default Picture settings
Switches to a wide view
•
VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
XGA (1,024 × 768 pixels), WXGA (1,366 × 768 pixels)
•
Options change depending on signals
Set to the minimum level if noise occurs
Adjusts horizontal position
Adjusts vertical position
Eliminates fl icker and distortion
•
Adjust after Clock adjustment
Chooses another synchronous signal if the image is distorted (H & V / On G)
•
H & V : by the horizontal and vertical signals from your PC
On G : by the green signal from your PC (if available)
Press the OK button to reset to the default Setup settings
•
Corresponding signals
•
If "H-freq." or "V-freq." is shown in red,
the signals may not be supported.
to
(p. 18)
•
Set to the minimum level if noise occurs
access
select
p. 43
29
Advertisement
Table of Contents
