Assembly screw (4)
M4 × 30
Securing the TV
Use the assembly screws to fasten securely.
•
Make sure that the screws are securely tightened.
•
Carry out the work on a horizontal and level surface.
•
Depending on the length of the screw driver you use, it is difficult to tighten the two screws at the bottom. Make sure all
screws are securely tightened.
To prevent from falling, please secure the TV to the wall by using strong string or wire.
•
Put the strong string or wire through the hole on the bottom rear of the TV as shown in the illustration.
8
Stand
•
TBL5ZX0173 (TX-L32DT35E)
•
TBL5ZX0172 (TX-L37DT35E)
Foam mat or thick soft cloth
Back of the TV