Panasonic Viera TX-L32DT35E Operating Instructions Manual page 16

[WPS(Push button)]
6
1. Press the WPS button on the access point until the light flashes
2. Connect the Wireless LAN Adaptor and the access point
WPS(Push button)
1) Please press the 'WPS' button on the access
point until its light flashes.
2) When the light is flashing select 'Connect' on
TV.
If you are unsure, please check the instruction
manual of the access point.
3. After the access point setting is finished, perform the connection test
4. Go to the next step
(Press twice)
Select [Home]
7
Select [Home] viewing environment to use in your home environment.
Please select your viewing environment.
Home
■
[Shop] viewing environment (for shop display only)
[Shop] viewing environment is the demonstration mode to explain main features of this TV.
Select [Home] viewing environment to use in your home environment.
•
You can return to viewing environment selection screen at the stage of Shop confirmation screen and Automatic
Demo Off / On selection screen.
1
Return to viewing environment selection
screen
Shop
You have selected shop mode
Automatic Demo
Off
To change viewing environment later on, you will need to initialise all settings by accessing Shipping Condition.
[Shipping Condition] (p. 65)
Auto Setup is now complete and your TV is ready for viewing.
If tuning has failed, check the connection of the satellite cable, RF cable, and then, follow the on screen instructions.
Note
•
To check channel list at-a-glance
•
To edit or hide (skip) channels
•
To retune all channels
•
To add the available TV mode later
•
To initialise all settings
If you connect the Wireless LAN Adaptor later on, the confirmation screen will be
displayed for the setup.
•
To setup the wireless connection
16
•
•
•
Connect
Connection Test
Check access point connection.
Check acquired IP address.
Check for devices using same IP address.
Check gateway connection.
Check server connection.
7
Shop
RETURN
On
"Using TV Guide" (p. 22)
"Tuning and Editing Channels" (p. 50 - 55)
[Auto Setup] (p. 46 - 49)
[Add TV Signal] (p. 41 - 43)
[Shipping Condition] (p. 65)
(p. 92 - 94)
Ensure that your access point supports WPS for this setup.
WPS : Wi-Fi Protected Setup™
If the connection has failed, check the settings and positions of your
access point. And then, follow the on screen instructions.
: succeeded
The test is successful and the TV is connected to the
network.
: failed
Check the settings and connections. And then select
[Retry].
•
To set manually, select [Manual] and set each item. For
details (p. 91)
select
set
2
Select [Home]
Please select your viewing environment.
Home
BACK/
select
Shop
set
Wireless LAN adaptor connection
Wireless LAN adaptor connected, do you want to
set it up?
No - Exit
Current network type : Wireless
Yes No