Panasonic Viera TX-L32DT35E Operating Instructions Manual page 37

Menu Item
3D-COMB
3D Settings
Screen Display
Area Dimmer Control
Intelligent Frame
Creation
24p Smooth Film
Film Cadence
Detection
3D Refresh Rate
Resolution Enhancer
16:9 Overscan
Adjustments / Configurations (alternatives)
Makes still or slow moving pictures look more vivid [Off] / [On]
•
Occasionally, whilst viewing still or slow moving pictures, colour patterning may be
seen. Set to [On] to display sharper and more accurate colours.
•
For PAL or NTSC signal reception only
•
Not valid on 3D, RGB, Component, PC, HDMI and Media Player
Adjusts and sets to view 3D images (p. 32)
Turns the screen off when you select [Off ]
[Off] / [On]
•
The sound is active even if the screen turns off.
•
Press any buttons (except Standby) to turn the screen on.
•
This function is effective in reducing power consumption when listening to the sound
without watching the TV screen.
Automatically controls dark areas according to the images [Off] / [On]
•
If the uncomfortable dark images occur, set to [Off ].
•
Not valid when [Viewing Mode] is set to [True Cinema], [Game], [Professional1] or
[Professional2].
Automatically compensates the picture frame rate and removes juddering movements
to make the images smooth [Off] / [Mid] / [Max]
•
Depending on the contents, images may be noisy. To prevent the noise, change the
setting.
•
This function is not available for selection (default to [Off ]) when [Viewing Mode] is
set to [Game] or in the mode of PC input / network service operations.
Automatically compensates the picture frame rate to make the 24p source movie
images smooth [Off] / [Mid] / [Max]
•
This is available only for 24p signal input and displayed instead of [Intelligent Frame
Creation].
•
This function is not available for selection (default to [Off ]) when [Viewing Mode] is
set to [Game] or in the mode of PC input / network service operations.
Automatically makes the film source movie images clear [Off] / [On]
•
This function is available for the interlaced signal (except when [Viewing Mode] is set
to [Game]).
Reduces juddering and flicker noises of the 3D images when using the 3D Eyewear
[Auto] / [100Hz] / [120Hz]
[100Hz] :
If the room is lit by fluorescent lights / dimmers (50 Hz) and light appears to flicker.
[120Hz] :
If the input signal is 50 Hz and flicker noises appear.
Enhances the picture resolution to make the image sharper [Off] / [Mid] / [Max]
•
This function is available for SD (Standard definition) signal.
•
As for HD (High definition) signal, this function is available when aspect mode is set
to [16:9] ([16:9 Overscan] is set to [On]), [4:3 Full] or [Zoom].
•
Not valid on Media Player and network service operations
Selects the screen area displaying the image [Off] / [On]
[On] :
Enlarged the image to hide the edge of the image.
[Off] :
Displayed the image in the original size.
•
Set to [On] if noise is generated on the edge of the screen.
•
This function is available when aspect is set to [Auto] (16:9 signal only) or [16:9].
•
This function can be memorized separately for SD (Standard definition) and HD (High
definition) signals.
•
Not valid on PC and VIERA Connect
37