Speaker Installation Option - Panasonic SC-HTE50 Operating Instructions Manual

Speaker installation option

Attaching to a wall
Drive a screw (not supplied) into the wall.
≥ Use the measurements indicated below to identify the screwing positions on the wall.
≥ Leave at least 20 mm of space above and 10 mm of space each side of the speaker to allow enough space for fitting the
speaker.
≥ The position in the wall where the screw is to be attached as well as the screw should be capable of supporting over 10 kg.
≥ Keep the screws out of reach of children to prevent swallowing.
Fit the speaker(s) securely onto the screw(s) with the hole(s).
≥ Place the speaker that is connected with the speaker cable with a red connector on the observers' right, and connect with the
speaker cable with a white connector on the observers' left.
12
VQT4E88
A At least 30 mm
B ‰4.0 mm
C ‰7.0 mm to
‰9.4 mm
D Wall or pillar
E 5.5 mm to 6.5 mm
DO
≥ Move the speaker so
that the screw is in
this position.
F 24 mm
G 40 mm
DO NOT
≥ In this position, the
speaker will likely fall
if moved to the left or
right.