Indicator Illumination - Panasonic SC-HTE50 Operating Instructions Manual

Indicator illumination

The indicators display the condition of this system by flashing. The indicator patterns illustrated below
are displayed during normal operational conditions. They do not refer to the indications of a problem.
Refer to "Troubleshooting" (
Indicator
§The selected source indicator will also light.
19) if the indicators do not light as illustrated below.
Description
The indicators blink from left to right (i) or from right to left
(s).
≥ When the speaker volume, the subwoofer level, or dialog effect level is
adjusted ( 14, 15)
The indicators blink simultaneously.
≥ When "MUTE" is on (
The indicator blinks for 10 sec.
≥ When the audio output mode is Multi-channel mode (
≥ When 3D surround effect and clear-mode dialog effect are on (
≥ When the dual audio setting is Main (
≥ When the auto gain control is on (
≥ When the subwoofer level or the dialog effect level is 1 (
The indicator blinks for 10 sec.
≥ When the audio output mode is Auto mode (
≥ When the subwoofer level or the dialog effect level is 2 (
The indicator blinks for 10 sec.
≥ When the audio output mode is Auto mode (
The indicator blinks for 10 sec.
≥ When the subwoofer level or the dialog effect level is 3 (
The indicator blinks for 10 sec.
≥ When the audio output mode is 2ch mode (
≥ When 3D surround effect and clear-mode dialog effect are off (
≥ When the dual audio setting is Secondary (
≥ When the auto gain control is off (
≥ When the subwoofer level or the dialog effect level is 4 (
The indicators blink for 10 sec.
≥ When the dual audio setting is Main and Secondary (
The indicators blink for 10 sec.
≥ When the remote control code is changed (
The indicators blink once.
≥ When changing the setting ("To reduce the clear-mode dialog effect", "To
turn off VIERA Link "HDAVI Control"" and "To turn off the volume limitation")
( 19)
14)
18)
18)
16)
16)
16)
18)
18)
18)
16)
18)
14, 15)
14, 15)
14, 15)
18)
14, 15)
18)
21
VQT4E88