Speaker Installation Option - Panasonic SC-XH185 Operating Instructions Manual

Speaker installation option

Attaching to a wall
You can attach all of the speakers (except subwoofer) to a wall.
≥ The wall or pillar on which the speakers are to be attached should be
capable of supporting 10 kg per screw. Consult a qualified building
contractor when attaching the speakers to a wall. Improper attachment
may result in damage to the wall and speakers, and personal injury.
1 Drive a screw (not supplied) into the wall.
‰
4.0 mm
Wall or pillar
2 Fit the speaker securely onto the screw(s) with the hole(s).
DO NOT
≥ In this position, the speaker will
likely fall if moved to the left or
right.
∫ Tips
Use the measurements indicated below to identify the screwing positions
on the wall.
≥ Leave at least 20 mm of space above the speaker and 10 mm on each
side to allow enough space for fitting the speaker.
Center speaker
 


Downloaded From TheatreSystem-Manual.com Manuals 20
At least 30 mm
‰ ‰
7.0 mm to 9.4 mm
5.5 mm to 7.5 mm
e.g., Center speaker
DO
≥ Move the speaker so that the
screw is in this position.
A 18 mm

B 65 mm
C 24 mm
D 95.5 mm
E 27 mm
Front and surround speakers
Attach to a wall without the base and the stand
 



∫ To prevent speakers from falling
Front speaker, Surround speaker, Center speaker
e.g. Front speaker
String (not supplied)
Less than
10 cm
Reattaching the speaker cable
Insert the cable
from the bottom.
F 65 mm
G 349 mm
H 110 mm
I 51 mm
J 51 mm
Screw eye
(not supplied)
Wall
Leave about
120 mm.
Pull out the cable
through the hole.