Speaker fall prevention measures
To prevent the speakers from falling, it is recommended, as an additional
protection measure, to attach the speakers to the wall with a fall prevention
cord (hereafter "cord").
≥ Consultation with a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a
surface that may not have strong enough support is recommended (
wall and speakers, and personal injury.
≥ Use a cord of less then ‰1.5 mm, which is capable of supporting over 10 kg.
≥ Keep the screws out of reach of children to prevent swallowing.
≥ Make sure that the slack of the cord is minimal.
C
A Cord (not supplied)
B Screw eye (not supplied)
AC mains lead connection
≥ Connect only after all other connections are complete.
Active subwoofer
≥ The active subwoofer consumes a small amount of AC power, even when it is in standby mode (Approx. 0.12 W). In the
interest of power conservation, if you will not be using this system for a long time, unplug it from the household mains socket.
Saving energy
This system is designed to conserve its power consumption and save energy.
≥ This system will automatically switch to standby mode when no signal is input and no operation is performed for approx.
2 hours.
D
12). Improper attachment may result in damage to the
B
A
C
Wall-mounted speakers
C Wall
D TV
A To a household mains socket
A
13
VQT4E88