Internet Radio; Sound Adjustment; Clock And Timer - Panasonic SC-HC57 Operating Instructions Manual

To preset the channel
5
While listening to the radio broadcast
Press [OK].
6
Press [3, 4] to select the channel and then press
[OK].
∫ To improve FM sound quality
1
While receiving FM broadcasts, press
[PLAY MENU] repeatedly to select "FM MODE"
and then press [OK].
2
Press [3, 4] to select "MONO" and then press
[OK].
≥ This setting can be preset and memorised. To do so,
continue to step 5 of "Manual tuning and presetting".
≥ Select "STEREO" in step 2 to return to stereo broadcasts.
≥ "MONO" is cancelled if the frequency is changed.
≥ If "MONO" is selected, regardless of the type of signal this
unit is receiving, "FM MONO" is displayed. (
∫ To display the current signal status
Press [PLAY MENU] to display "FM STATUS" and
then press [OK].
"FM ST": The FM signal is in stereo.
"FM": The FM signal is in monaural.
≥ "FM" is also displayed even if this unit is not tuned to a
station.
∫ To display RDS text data
Press [DISPLAY] to display the text data.
≥ Each time you press the button:
PS: Programme service
PTY: Programme type
FREQ: Frequency display
≥ "STEREO" is displayed when this unit tunes to a stereo
broadcast.
≥ The unit can display the text data transmitted by the radio
data system (RDS) available in some areas. (RDS displays
may not be available if reception is poor.)

Internet Radio

This unit can output Internet radio if "vTuner for
Panasonic" is installed on your iPhone/iPod touch.
Preparation
≥ Install "vTuner for Panasonic" to your iPhone/iPod
touch.
≥ Install iOS 5.0 or later.
1
Insert the iPhone/iPod touch to this unit.
2
Press [iPod] repeatedly to select "VTUNER".
{. "vTuner for Panasonic" starts.
≥ Visit the below website for the following information about
"vTuner for Panasonic":
http://radio.vtuner.com/panasonic/en/
(Compatible iPhone/iPod touch models and software
versions, purchasing, installation and operation details.)
≥ A pop-up screen may appear on your iPhone/iPod touch.
Follow the indicated instructions.
14
RQT9714

Sound adjustment

The following sound effects can be added to the audio
output.
1
Press [SOUND] repeatedly to select the effect and
then press [OK].
2
Press [3, 4] to select the setting and then press
[OK].
Direct-Vocal
Surround
(D.SURROUND)
Preset EQ
(PRESET EQ)
below)
Bass (BASS) or
Treble (TREBLE)
Dynamic Bass
(D.BASS)
≥ You may experience a reduction in sound quality when these
effects are used with some sources. If this occurs, turn the
sound effects off.

Clock and Timer

Setting the clock
This is a 24-hour clock.
1
Press [SETUP] repeatedly to select "CLOCK" and
then press [OK].
2
Press [3, 4] to set the time and then press [OK].
≥ To display the clock, press [SETUP] repeatedly to select
"CLOCK" and then press [OK] once. The time is displayed for
10 seconds.
(During standby, press [iPod MENU, DISPLAY] once.)
≥ The clock is reset when there is a power failure or when the
AC mains lead is removed.
≥ Reset the clock regularly to maintain accuracy.
"LEVEL 1", "LEVEL 2" or "OFF".
≥ The factory preset is "OFF".
"HEAVY" (heavy), "SOFT" (soft),
"CLEAR" (clear), "VOCAL"
(vocal) or "FLAT" (flat/off).
≥ The factory preset is "HEAVY".
Adjust the level (j4 to i4).
"ON D.BASS" or
"OFF D.BASS".
≥ The factory preset is
"ON D.BASS".