Additional Settings - Panasonic SC-HC57 Operating Instructions Manual

1
Press [SETUP] on the remote control repeatedly to
select "NET SETUP" and then press [OK].
{. "SETTING" is indicated on the display.
(The Wi-Fi status indicator blinks purple.)
®
2
Connect your iPhone to this unit's wireless
network called "Setup _ _ _ _ _ _"*
≥ Once "Setup _ _ _ _ _ _" is selected, the iPhone is
connected with this unit.
3
Start Safari on your iPhone and type
"http://192.168.1.12/" into the URL address field
and display the page.
{. This unit's setup window is displayed.
4
Select "Search wireless network".
5
Select and input the details.
[1] Select your home wireless network name.*
[2] Type the password.
[3] Select "NEXT".
6
Perform the "Additional settings". (
If they do not apply, continue to the next step.
10
RQT9714
7
Select "JOIN" to apply the settings.
{. In the pop-up screen select "OK" to continue.
{. The wireless status indicator lights blue.
{. When the configuration is finished "SUCCESS" is
.
1, 2
If "FAIL" is displayed press [OK]. Then check the
wireless network password and other settings and
start again from step 1.
8
Press [OK] on the remote control to complete the
settings.
9
Connect your iPhone back to your home wireless
network.
Instead of steps 4 and 5:
Select "Manual settings".
1
2
3
In step 6:
If your home wireless network has been setup to
use specific IP Addresses, Subnet Mask, Default
Gateway, Primary DNS, etc.
Select "Advanced network settings".
{. Input the required addresses into each field and select
"OK".
≥ To change the settings back to DHCP, select "ON" from
the "DHCP" drop down list.
If you want to change the name of this unit that is
displayed as the AirPlay speakers.
Select "Edit STEREO SYSTEM name".
{. Only ASCII characters can be used.
3
{. Type a new name into the "STEREO SYSTEM name"
field and select "OK".
3
≥ Enable Java and Cookies in your browser settings.
right)
≥ To cancel this setting in the middle, press [Í] to turn off the
unit.
*1: " _ " stands for a digit that is unique to each set.
*2: Make sure that DHCP is enabled for the network setting on
the iPhone.
*3: If you have set your wireless network to be invisible, select
"BACK" and refer to "Alternative settings". (
– Select "CANCEL" to return to the setup window.
– You can now close the Safari browser.
indicated on this unit's display.
Alternative settings
Type your home wireless network name into
the "Network name (SSID)" field.
Select the encryption method from the
"Security system" drop down list.
Type the password into the "Password" field
and then select "NEXT".

Additional settings

above)