Panasonic SC-HC57 Operating Instructions Manual page 7

3
Attach the wall mount bracket to the wall with 2
screws (not supplied). (Both sides)
≥ Use a spirit level to ensure both wall mount brackets are
level.
≥ Make sure that the screw used and the wall are strong
enough to support the weight of at least 33 kg.
At least 30 mm
‰4 mm
4
Fix the safety holder onto the unit with the screw
(supplied).
{. Screw tightening torque: 50 N0cm to 70 N0cm.
5
Attach the fall prevention cord (not supplied) to this
unit.
≥ Use a cord that is capable of supporting over 33 kg
(with a diameter of about 1.5 mm).
6
‰7.5 mm to
‰9.4 mm
Wall mount bracket
7
Screw
(supplied)
8
Cord (not supplied)
Hook the unit securely onto the wall mount
brackets with both hands.
≥ Connect the FM antenna and the AC mains lead to the
unit before hanging the unit onto the wall. (
≥ After hanging the unit, release your hand carefully to
confirm the unit sits securely on the wall.
Wall
Drive the safety holder fixing screw
(not supplied) to secure the safety holder onto the
wall.
≥ Make sure that the screw used and the wall are strong
enough to support the weight of at least 33 kg.
≥ Refer to step 3 for requirements before screwing.
Safety holder fixing screw
(not supplied)
Attach the fall prevention cord (not supplied) to the
wall.
≥ Make sure that the screw used and the wall are strong
enough to support the weight of at least 33 kg.
≥ Make sure that the slack of the cord is minimal.
Screw eye (not supplied)
Cord (not supplied)
8)
Safety holder
Fixed to the
wall
Wall
7
RQT9714