Table of Contents
Advertisement
Inserting the Card
Set STANDBY to OFF when inserting or removing a Card.
SD Memory Card Slot
1
Push up slightly on card
door to swing open.
2
Insert the Memory Card
(labeled side up, cropped
corner right) and hold in
place until you hear a click.
3
Close the lid.
PC Card Slot
1
Slide the lever to open the
cover.
2
Insert the PC Card HDD or
PC Card all the way into
the slot.
3
Close the cover.
Caution
• Always insert card in the correct direction. Failure to do so may result in damage to the card
and this unit.
• The PC Card HDD and Memory Card are precision devices. Do not subject them to excessive
pressure or strong impacts.
• If the card door does not close completely, remove the card, check insertion orientation, and
reinsert. Also, confirm that EJECT TAB was firmly pressed.
18
Eng.p18-20.p65
cropped corner
1
2
18
2003/02/13, 16:48
To remove Card :
Open card door.
Press in lightly on
card then release.
To remove Card :
Press EJECT TAB
twice.
Advertisement
Table of Contents
